Course Overview

Cisco Certified Network Associate(CCNA)
4.5 star rating

Overview

Cisco Certified Network Associate (CCNA) validates the ability to install, configure, operate, and troubleshoot medium-size route and switched networks, including implementation and verification of connections to remote sites in a WAN. The CCNA Routing and Switching certification will not only prepare you with the knowledge of foundational technologies, but ensure you stay relevant with skill sets needed for the adoption of next generation technologies.

Course Content
  • Module-1
  1. Basic Networking and different topologies of Network
  2. IP Addressing and Subneting
  3. OSI Model And TCP/IP Model
  4. Router and Switch Introduction and their Working
  5. LAN Switching Technology
  6. Ethernet Standards (IEEE-802.3)
  7. Types Of Cables and Connectors(Twisted Pair Cable, Fiber Cables, Serial Cables)
  • Module-2
  1. CISCO IOS Introduction
  2. Hardware components of a CISCO Device
  3. Accessing of a CISCO device via
  4. Different Modes in Configuration of a CISCO Device
  5. Administrative Configuration and Basic Configuration via CLI Mode and GUI
  • Module-3
  1. IP Routing Basic
  2. Routed and Routing Protocols and Differences
  3. Configuration of Static Routes, Default Routes
  4. Routing Protocols
  • Module-4
  1. Introduction Of a CISCO Switch
  2. Basic Configurations on a CISCO Switch
  3. Description and Configuration of Port-Security
  4. Introduction of VLAN,s
  5. Redundancy in CISCO Switches and STP Protocol
  6. FHRP, VRRP, HSRP, GLBP configuration
  • Module-5
  1. Cisco Device management
  2. IP Filtering via ACCESS Control List
  3. Network Address Translations
  • Module-6
  1. Introduction of Different WAN technologies
  2. Configure and Verify a PPP Connection b/w CISCO Routers
  3. Configure and Verify Frame Relay On CISCO Routers
  4. Implement and Troubleshoot PPPoE
  • Module-7
  1. IP-V-6 Description
  2. Configuration of IP-V-6 on CISCO Routers
  3. Implementation of OSPF-V-3,EIGRP in IP-V-6
  4. Tunneling
Pre Requisite

Although the Cisco Certified Network Associate (CCNA) exam has no official prerequisites, the Cisco Certified Entry Network Technician (CCENT) certification is a good starting point to prepare for the more advanced CCNA certification.

Required Exam

CCNA Composite Exam: The 200-120 CCNA is the composite exam associated with the Cisco CCNA Routing and Switching certification. Candidates can prepare for this exam by taking the Interconnecting Cisco Networking Devices: Accelerated (CCNAX) course. This exam tests a candidate's knowledge and skills required to install, operate, and troubleshoot a small to medium size enterprise branch network. The topics include all the areas covered under ICND 1 and ICND2 Exams.

Duration
hideRegular TrackFast Track
Duration 4 weeks 2 weeks

Success Stories

Trained 1000+ Students From 10+ Countries

Blog